METplus-5.1 Existing Builds

The METplus team supports the installation of the METplus software components on several operational research high performance computing platforms. This includes installations at NCAR, NOAA, and other select community machines. Pre-built METplus images on DockerHub are also provided.

The NCAR/RAL Common Installation location under the NCAR Machines drop down menu is only updated after official releases. No developmental releases are installed in a common space on RAL machines.

Please submit a new discussion in the METplus Components Discussion forum if no instructions exist for the current release on a supported platform and the release is needed on that platform.

Select from the list below for instructions on using existing builds of the METplus components' software packages. If an installation is needed on a machine not listed here, please follow the installation instructions in the MET User’s Guide.

NCAR machines

CASPER

NCAR MACHINE CASPER (see Casper Information)

METplus-5.1.0
- METplus-5.1.0 Installation:
  - /glade/work/dtcrt/METplus/casper/components/METplus/installations/METplus-5.1.0
- METplus-5.1 Sample Data
  - /glade/work/dtcrt/METplus/data/components/METplus/METplus-5.1_sample_data
- Create your own file like /glade/work/dtcrt/METplus/derecho/components/METplus/installations/casper.dtcrt.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
- To set up the environment run:

export TOP_DIR=/glade/work/dtcrt/METplus/casper/components

module use $TOP_DIR/METplus/installations/modulefiles

module load metplus/5.1.0

METv11.1.0
- MODULES:

export TOP_DIR=/glade/work/dtcrt/METplus/casper/components

module use $TOP_DIR/MET/installations/modulefiles

module load met/11.1.0

METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES:

export TOP_DIR=/glade/work/dtcrt/METplus/casper/components

module use $TOP_DIR/METcalcpy/installations/modulefiles 

module load metcalcpy/2.1.0

module use $TOP_DIR/METplotpy/installations/modulefiles

module load metplotpy/2.1.0

METdataio-2.1.0
- MODULES:

export TOP_DIR=/glade/work/dtcrt/METplus/casper/components

module use $TOP_DIR/METdataio/installations/modulefiles

module load metdataio/2.1.0

DERECHO

### WARNING ###

Users are encouraged to run METplus on Casper or submit to the develop queue on Derecho. Submitting serial METplus jobs to the main queue on Derecho may incur up to 128 times more charges than necessary. Please see this Derecho Job-submission queues and charges summary.

NCAR MACHINE DERECHO (See Derecho Information)

METv11.1.0
- MODULES:
  - module use /glade/work/dtcrt/METplus/derecho/components/MET/installations/modulefiles
  - module load met/11.1.0
METplus-5.1.0
- METplus-5.1.0 Installation:
  - /glade/work/dtcrt/METplus/derecho/components/METplus/installations/METplus-5.1.0
- METplus-5.1 Sample Data:
  - /glade/work/dtcrt/METplus/data/components/METplus/METplus-5.1_sample_data
- To set up the environment run: Create your own file like /glade/work/dtcrt/METplus/derecho/components/METplus/installations/derecho.dtcrt.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
  - module use /glade/work/dtcrt/METplus/derecho/components/METplus/installations/modulefiles
  - module load metplus/5.1.0
METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES:
  - module use /glade/work/dtcrt/METplus/derecho/components/METcalcpy/installations/modulefiles
  - module load metcalcpy/2.1.0
  - module use /glade/work/dtcrt/METplus/derecho/components/METplotpy/installations/modulefiles
  - module load metplotpy/2.1.0
METdataio-2.1.0
- MODULES:
  - module use /glade/work/dtcrt/METplus/derecho/components/METdataio/installations/modulefiles
  - module load metdataio/2.1.0

NCAR/RAL Common Installation

NCAR RAL MACHINES (STANDARD LOCATION)

METv11.1.0
- MET BUILD: /usr/local/met
METplus-5.1.0
- METplus INSTALLATION: /usr/local/METplus

NCAR/RAL Internal Development

NCAR RAL MACHINES SENECA

METv11.1.0-beta1

MET BUILD:

NCAR RAL MACHINES KIOWA

METv11.1.0-beta1

MET BUILD:

NCAR RAL MACHINES MOHAWK

METviewer v5.1.0-beta1

LOCATION:
URL:

NOAA machines

WCOSS2

NOAA machines Dogwood and Cactus (WCOSS2 - Cray)

METv11.1.0-rc1 / METplus-5.1.0-rc2
- DATE: 20230712
- MODULES:
  - module reset
  - module use /apps/ops/para/libs/modulefiles/compiler/intel/19.1.3.304
  - export HPC_OPT=/apps/ops/para/libs
  - module use /apps/dev/modulefiles/
  - module load ve/evs/1.0
  - module load gsl/2.7
  - module load netcdf/4.7.4
  - module load met/11.1.0-rc1
  - module load metplus/5.1.0-rc2

HERA

NOAA MACHINE HERA

METv11.1.0
- MODULES:
  - module load intel/2022.1.2
  - module use -a /contrib/met/modulefiles/
  - module load met/11.1.0
METplus-5.1.0
- METplus-5.1.0 Installation
  - /contrib/METplus/METplus-5.1.0
- METplus-5.1 Sample Data
  - /scratch1/BMC/dtc/METplus/METplus-5.1_sample_data
- To use METplus run: Create your own file like /scratch1/BMC/dtc/Julie.Prestopnik/METplus/hera.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
  - module load intel/2022.1.2
  - module use /contrib/METplus/modulefiles
  - module load metplus/5.1.0
METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES:
  - module load intel/2022.1.2
  - module use /contrib/METcalcpy/modulefiles
  - module load metcalcpy/2.1.0
  - module use /contrib/METplotpy/modulefiles
  - module load metplotpy/2.1.0
METdataio-2.1.0
- MODULES:
  - module load intel/2022.1.2
  - module use /contrib/METdataio/modulefiles
  - module load metdataio/2.1.0

JET

NOAA MACHINE JET

METv11.1.0
- MODULES:
  - module load intel/2022.1.2
  - module load netcdf/4.7.0
  - module load hdf5/1.10.5
  - module load contrib
  - module use /contrib/met/modulefiles
  - module load met/11.1.0
METplus-5.1.0
- METplus-5.1.0 Installation
  - /contrib/met/METplus/METplus-5.1.0
- METplus-5.1 Sample Data
  - /lfs1/HFIP/dtc-hurr/METplus/METplus-5.1_sample_data
- To use METplus run:
  - module load intel/2022.1.2
  - module load netcdf/4.7.0
  - module load hdf5/1.10.5
  - module load nco/4.9.1
  - module load wgrib/1.8.1.0b
  - module load wgrib2/2.0.8
  - module load R/4.0.2
  - module use /contrib/met/modulefiles
  - module load met/11.1.0
  - module use /contrib/met/METplus/modulefiles
  - module load metplus/5.1.0
- Create your own file like /lfs1/HFIP/dtc-hurr/Julie.Prestopnik/METplus/jet.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES:
  - module load intel/2022.1.2
  - module use /contrib/met/METcalcpy/modulefiles
  - module load metcalcpy/2.1.0
  - module use /contrib/met/METplotpy/modulefiles
  - module load metplotpy/2.1.0
METdataio-2.1.0
- MODULES:
  - module load intel/2022.1.2
  - module use /contrib/met/METdataio/modulefiles
  - module load metdataio/2.1.0

ORION

NOAA MACHINE ORION (MANAGED BY MSU)

METv11.1.0
- MODULES:
  - module load contrib
  - module load intel/2020.2
  - module load met/11.1.0
METplus-5.1.0
- METplus-5.1.0 Installation
- METplus-5.1 Sample Data
  - /work/noaa/ovp/jprestop/METplus/METplus-5.1_sample_data
- To use METplus run:
  - module use /apps/contrib/modulefiles
  - module load metplus/5.1.0
  Create your own file like /work/noaa/ovp/jprestop/METplus/orion.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES: PIP INSTALL:
  - module load contrib
  - module load intel/2020.2
  - module use /apps/contrib/modulefiles
  - module load metcalcpy/2.1.0
  - module load metplotpy/2.1.0
  - python -m pip install --user tornado
  - python -m pip install --user plotly
  - python -m pip install --user kaleido
  - python -m pip install --user xarray
  - python -m pip install --user netcdf4
  - python -m pip install --user h5netcdf
METdataio-2.1.0
- MODULES:
  - module load contrib
  - module load intel/2020.2
  - module use /apps/contrib/modulefiles
  - module load metdataio/2.1.0

GAEA

NOAA MACHINE GAEA

METv11.1.0
- MODULES:
  - module load intel/2022.2.1
  - module use -a /usw/met/modulefiles/
  - module load met/11.1.0
METplus-5.1.0
- METplus-5.1.0 Installation
  - /usw/met/METplus/METplus-5.1.0
- METplus-5.1 Sample Data
  - /lustre/f2/dev/esrl/Julie.Prestopnik/projects/METplus/METplus-5.1_sample_data
- To use METplus run:
  - module load intel/2022.2.1
  - module use /usw/met/METplus/modulefiles
  - module load metplus/5.1.0
- Create your own file like /lustre/f2/dev/esrl/Julie.Prestopnik/projects/METplus/gaea.metplus.conf where you will set your own INPUT_BASE and OUTPUT_BASE.
METcalcpy-2.1.0 / METplotpy-2.1.0
- MODULES:
  - module load intel/2022.2.1
  - module use /usw/met/METcalcpy/modulefiles
  - module load metcalcpy/2.1.0
  - module use /usw/met/METplotpy/modulefiles
  - module load metplotpy/2.1.0
METdataio-2.1.0
- MODULES:
  - module load intel/2022.2.1
  - module use /usw/met/METdataio/modulefiles
  - module load metdataio/2.1.0

Community machines

FRONTERA

TEXAS ADVANCED COMPUTING CENTER (TACC) FRONTERA

METv11.1.0-beta1
- MODULES:
METplus-5.1.0-beta1
- METplus-5.1.0-beta1 Installation
- METplus-5.0 Sample Data
  - work2/06612/tg859120/frontera/METplus//METplus-5.0_sample_data
- To set up the environment run:
- Create your own file like /work2/06612/tg859120/frontera/METplus/frontera.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

Docker Hub

MET

docker pull dtcenter/met:11.1-latest

https://hub.docker.com/r/dtcenter/met

METplus

docker pull dtcenter/metplus:5.1-latest

https://hub.docker.com/r/dtcenter/metplus

AWS

METviewer v5.1.0-beta1

LOCATION:
URL:

METplus | METplus-5.1 Existing Builds

NCAR MACHINE CASPER (see Casper Information)

### WARNING ###

NCAR MACHINE DERECHO (See Derecho Information)

NCAR RAL MACHINES (STANDARD LOCATION)

NCAR RAL MACHINES SENECA

NCAR RAL MACHINES KIOWA

NCAR RAL MACHINES MOHAWK

NOAA MACHINE HERA

NOAA MACHINE JET

NOAA MACHINE ORION (MANAGED BY MSU)

NOAA MACHINE GAEA

TEXAS ADVANCED COMPUTING CENTER (TACC) FRONTERA

METplus

Latest Release

Sitemap

Contact

Addresses

Follow Us