METplus | METplus-3.1 Existing Builds

Select from the list below for instructions on using existing builds of the MET and METplus software packages.

NCAR RAL machines (standard location)

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MET BUILD: /usr/local/met/bin

NCAR RAL machines kiowa

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MET BUILD: /d1/projects/MET/MET_releases/met-9.1/bin
  • METplus-3.1
    • METplus-3.1 Installation
      • /d1/projects/METplus/METplus_releases/METplus-3.1
    • METplus-3.1 Sample Data
      • /d1/projects/METplus/METplus_Data
    • To set up the environment run:
      • bash
      • conda deactivate
      • conda activate /home/met_test/.conda/envs/metplus_env

NCAR RAL machines eyewall

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MET BUILD: /d1/CODE/MET/MET_releases/met-9.1/bin
  • METplus-3.1
    • METplus-3.1 Installation
      • /d1/CODE/METplus/METplus_releases/METplus-3.1/
    • METplus-3.1 Sample Data
      • /d1/METplus_Data

NCAR RAL machines dakota

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MET BUILD: /d3/projects/MET/MET_releases/met-9.1/bin
  • METplus-3.1
    • METplus-3.1 Installation
      • /d3/projects/METplus/METplus_releases/METplus-3.1

NCAR machine cheyenne

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MODULES:
      • module use /glade/p/ral/jntp/MET/MET_releases/modulefiles
      • module load met/9.1
      • ncar_pylib
  • METplus-3.1
    • METplus-3.1 Installation
      • /glade/p/ral/jntp/MET/METplus/METplus-3.1
    • METplus-3.1 Sample Data
      • /glade/p/ral/jntp/MET/METplus/METplus-3.1_sample_data
    • To set up the environment run:
      • module use /glade/p/ral/jntp/MET/METplus/modulefiles
      • module load metplus/3.1
      • ncar_pylib
    • Create your own file like /glade/p/ral/jntp/jpresto/METplus/cheyenne.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

NCAR machine casper

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MODULES:
      • module use /glade/p/ral/jntp/MET/MET_releases/casper/modulefiles
      • module load met/9.1
      • ncar_pylib

NOAA machine Hera

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MODULES:
      • module use -a /contrib/anaconda/modulefiles
      • module load intel/18.0.5.274
      • module load anaconda/latest
      • module use -a /contrib/met/modulefiles/
      • module load met/9.1
  • METplus-3.1
    • METplus-3.1 Installation
      • /contrib/METplus/METplus-3.1
    • METplus-3.1 Sample Data
      • /scratch1/BMC/dtc/Julie.Prestopnik/METplus/METplus-3.1_sample_data
    • To set up the environment run:
      • module use /contrib/METplus/modulefiles
      • module load metplus/3.1
      • Create your own file like /scratch1/BMC/dtc/Julie.Prestopnik/METplus/hera.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

NOAA machine Jet

  • METv9.1
    • PATCH LEVEL/DATE:
    • MODULES:
  • METplus-3.1
    • METplus-3.1 Installation
    • METplus-3.1 Sample Data
    • To set up the environment run:

NOAA machine Luna (WCOSS - Cray)

  • METv9.1
    • PATCH LEVEL/DATE: 
    • MODULES:
      • module use /gpfs/hps3/emc/meso/noscrub/emc.metplus/modulefiles
      • module load met/9.1

NOAA machine Surge (WCOSS - Cray)

  • METv9.1
    • PATCH LEVEL/DATE:
    • MODULES: 
      • module use /gpfs/hps3/emc/meso/noscrub/emc.metplus/modulefiles
      • module load met/9.1
  • METplus-3.1
    • METplus-3.1 Installation
    • METplus-3.1 Sample Data
    • To set up the environment run:

NOAA machine Mars (WCOSS - Dell)

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MODULES:
      • module use /gpfs/dell2/emc/verification/noscrub/emc.metplus/modulefiles
      • module load met/9.1
  • METplus-3.1
    • METplus-3.1 Installation
      • /gpfs/dell2/emc/verification/noscrub/emc.metplus/METplus/METplus-3.1
    • METplus-3.1 Sample Data
      • /gpfs/dell2/emc/verification/noscrub/Julie.Prestopnik/METplus/METplus-3.1_sample_data
    • To use METplus run:
      • module use /gpfs/dell2/emc/verification/noscrub/emc.metplus/modulefiles
      • module load metplus/3.1
      • Create your own file like /gpfs/dell2/emc/verification/noscrub/Julie.Prestopnik/METplus/mars.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

NOAA machine Venus (WCOSS - Dell)

  • METv9.1
    • PATCH LEVEL/DATE: 
    • MODULES: 
      • module use /gpfs/dell2/emc/verification/noscrub/emc.metplus/modulefiles
      • module load met/9.1
  • METplus-3.1
    • METplus-3.1 Installation
      • /gpfs/dell2/emc/verification/noscrub/emc.metplus/METplus/METplus-3.1
    • METplus-3.1 Sample Data
      • /gpfs/dell2/emc/verification/noscrub/Julie.Prestopnik/METplus/METplus-3.1_sample_data
    • To use METplus run:
      • module use /gpfs/dell2/emc/verification/noscrub/emc.metplus/modulefiles
      • module load metplus/3.1
      • Create your own file like /gpfs/dell2/emc/verification/noscrub/Julie.Prestopnik/METplus/venus.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

NOAA machine Orion (managed by MSU)

  • METv9.1
    • PATCH LEVEL/DATE: 20200810
    • MODULES: 
      • module load contrib
      • module load intel/2020
      • module load intelpython3/2020
      • module load met/9.1
  • METplus-3.1 
    • METplus-3.1 Installation, includes bugfix from Issue 586
      • /apps/contrib/MET/METplus/METplus-3.1
    • METplus-3.1 Sample Data
      • /work/noaa/ovp/jprestop/METplus/METplus-3.1_sample_data
    • To set up the environment run:
      • module use /apps/contrib/modulefiles
      • module load metplus/3.1
    • Create your own file like /work/noaa/ovp/jprestop/METplus/orion.jpresto.conf where you will set your own INPUT_BASE and OUTPUT_BASE.

Texas Advanced Computing Center (TACC) machine Stampede2

  • METv9.1
    • PATCH DATE: 
    • MODULES: